Filter bag hot air welding machine solutions
NOUVELLES

Filter bag hot air welding machine solutions

vues : 2516
temps de mise à jour : 2018-05-20 15:21:03

Filter bag hot air welding machine solutions

Equipment configuration:

Frame: steel structure

Power supply: three phase 380V

Equipment power: around 5KW

Hot air mechanism: imported (3.3KW), hot air temperature adjustable.

Working mechanism: speed motor, equipment must have gas source.

Working principle:

High temperature hot air radiation heating is used to melt and melt the fabric at the same time.

Requirements for raw materials

1, a central hollow shaft is needed for loading on the feeding rack and providing the inner diameter of the axle.

2, must be smooth, both sides should be neatly;

3, the size should be consistent;

4. Provide the inner diameter of the finished product.

5, provide product material (provide basis for adjusting hot air temperature);

6. Provide the maximum outer diameter and weight of a coil of raw materials (provide reference for the design of feeding mechanism).